| 最大插槽長度（插削內孔850mm） | max.siotting(850mm for internal slotting) | 1000mm |
| 切削行程速度 | cutting stroke speed | 4-25m/min |
| 返回行程速度 | return stroke speed | 7-25mm/min |
| 可插削工作的最大重量 | max.weight of the workpiese for slotting | 400kg |
| 主傳動電機功率 | power of main drive motor | 30kw |
| 允許最大切削力（當行程速度為10米-20米/分時） | max.table cutting force(within ran traverse speed of 10-20m/min) | 24500N |
| 工作臺直徑 | Table diameter | 1250mm |
| 工作臺的最大移動量 | Max.table traverse longitudinal cross? | 1200mm 1000mm |
| 刀具支承面至床身前壁距離 | Distance between tool holding surface and column fornt | 1120mm |
|
進給量范圍縱向 橫向 圓周(在ф700圓周上) |
Rang of feed Longitudinal cross circular(along ф700circular) |
0.2-5mm/double stroke 0.2-5mm/double stroke 0.4-10mm/double stroke |
| 工作臺面至滑架下端間距離 | Distance bdtween worktable and lower side of slide | 1140mm |
| 工作臺快移:縱向及橫向 | Ttable rapid traverse speed,longitudinal or cross | 500m/min |
| 機床外形尺寸(長*寬*高) | Overall dimension(L*W*H) | 4400*2830*5730mm |
| 機床總重量(包括電氣設備) | Total weight of machine(including electrical equipment) | 22t |
